FASTASeq S is designed for laboratories that need rapid sequencing turnaround from library preparation to data output. The platform combines a high-speed fluidic system, updated enzyme chemistry and AI-powered base calling to improve cycle efficiency while maintaining high-quality output from low-input samples.
Key advantages
For Research Use Only. Not intended for diagnostic or clinical procedures. Availability may vary by country.
Type: Sequencing system
Section: Sequencers
lwh: 626x580x575 mm
Weight: 100000 g
| Advantage | Details |
| Swift | 2.0 hr SE50, 3.0 hr SE100 and 6.8 hr PE150 listed run times; lightning chemistry reduces cycle time by 50%. |
| Simple | User-friendly interface and about 7 minutes of NGS run preparation. |
| Saving | Reduces reagent consumption by 70% and supports sequencing on demand. |
| Social Responsible | Smart waste sorting and processing design; room-temperature shipping and storage for load-and-go reagent. |
| Parameter | Value |
| Flow cell options | FCL, FCM, FCX, FCH |
| Fastest listed run | SE50 in about 2.0 hours |
| Maximum listed output | 24 Gb with FCH PE150 or FCX PE300 |
| Dimensions (W x D x H) | 626 mm x 580 mm x 575 mm |
| Weight | About 100 kg |
| Power requirements | <= 1000 VA; 200-240 V, 50/60 Hz</td> |
| Operating environment | 19-30 deg C; 20-80% RH, non-condensing; altitude <= 3000 m</td> |
| Control computer | Intel Core i7-13700T; 64 GB memory; 4 TB hard drive; Windows 10 |
| Flow cell | Lane | Reads/FC | Specification | Read length | Output | Q30 | TAT |
| FCL | 1 | 20M | SE100-D | SE50 | 1 Gb | >=90% | ~2.0 hr |
| FCL | 1 | 20M | SE100-D | SE100 | 2 Gb | >=90% | ~3.0 hr |
| FCL | 1 | 20M | 100 cycles | PE50 | 2 Gb | >=90% | ~4.0 hr |
| FCL | 1 | 20M | 300 cycles | PE150 | 6 Gb | >=90% | ~6.8 hr |
| FCL | 1 | 20M | 400 cycles | SE400 | 8 Gb | >=80% | ~16 hr |
| FCM | 1 | 40M | SE100-D | SE50 | 2 Gb | >=90% | ~2.5 hr |
| FCM | 1 | 40M | 300 cycles | PE150 | 12 Gb | >=90% | ~7.5 hr |
| FCX | 1 | 40M | 600 cycles | PE300 | 24 Gb | >=85% | ~24 hr |
| FCH | 1 | 80M | SE100-D | SE50 | 4 Gb | >=90% | ~3.5 hr |
| FCH | 1 | 80M | 300 cycles | PE150 | 24 Gb | >=90% | ~12 hr |
| Application | Read length | Data per sample | FCL 20M | FCM/FCX 40M | FCH 80M |
| mNGS, probe capture | SE50 | 0.5M reads/sample | 20 | 40 | 80 |
| Microbial WGS | PE150 | 1 Gb/sample | 6 | 12 | 24 |
| 16S amplicon sequencing | PE300 | 50-100K reads/sample | / | 200-400 | / |
| Shallow shotgun metagenomics | PE150 | 4M reads/sample | 5 | 10 | 20 |
| TB-tNGS | PE100 | 2M reads/sample | 5 | 10 | 20 |
| Carrier screening | PE150 | 1.2 Gb/sample | 10 | 20 | 40 |
| HLA typing | PE150 | 0.6 Gb/sample | 20 | 40 | 80 |
| NGS library QC | SE100 | 0.1 Gb/sample | 60 | 120 | 240 |